- 10 N·m rated, 35 N·m peak Peak torque is a short-duration figure, so continuous duty has to be sized from the rated column and a defined cycle.
- 19.5:1 reduction, 60 rpm rated Peak speed is 200 rpm and no-load speed 200 rpm (±10 %), both separate from the rated figure.
- 65 mm diameter, 533.1 g The axial dimension is 61.2 mm (±0.5) with a 4.5 mm hollow bore, making this the compact member of the family.
- Dual encoders, 17 and 19 bit Feedback on both the motor side and the gearbox side, over CAN FD or EtherCAT.
- 48 V, 2 A rated and 16 A peak Line resistance of 0.81 Ω, inductance of 0.93 mH, an 8.3 V/krpm back-EMF constant and ten pole pairs complete the electrical column.
- Backlash of 15 arcmin or less Rated power is 62.8 W (±5 %) and motor rotational inertia at 8.3 kg·mm² for model inputs.
- Hardware drawings and driver source The family offers clamp fixation, hollow cable routing, hardware drawings and driver code, with dimensions specific to each model.
Description
The ROMOMO 6562 is the small, fully specified module in RoboParty's joint-module family: 10 N·m (±5 %) rated torque, 35 N·m peak, 60 rpm rated speed against a 200 rpm peak, through a 19.5:1 reduction. Its measured prototype mass is 533.1 g and its envelope is 65 mm in outer diameter and 61.2 mm (±0.5) along the axis, with a 4.5 mm hollow bore.
Rated and peak figures are separate things and RoboParty says so explicitly: the peak numbers describe short-duration conditions, not continuous output. A mechanism that needs sustained torque has to be sized on the rated column together with a defined duty cycle. Further motion data: no-load speed 200 rpm (±10 %), rated power 62.8 W (±5 %) and backlash of 15 arcmin or less.
Electrically it runs from 48 V at 2 A (±5 %) rated and 16 A (±10 %) peak, with 0.81 Ω line resistance at 20 °C, 0.93 mH line inductance, an 8.3 V/krpm back-EMF constant and ten pole pairs. Feedback is dual encoders at 17 bit on the motor side and 19 bit on the gearbox side, over CAN FD or EtherCAT, and motor rotational inertia is 8.3 kg·mm². One caution: the torque constant is 2.37 N·m/A, whereas the larger 10062's is 0.163 N·m/A, so confirm the reference point behind each figure with the quotation before putting either into a motor model.
ROMOMO modules are RoboParty's own actuators, the same family used in its ROBOTO 01 humanoids. The family is built for clamp fixation and hollow cable routing through the output, with access to hardware drawings and driver source code. Hollow dimensions and mounting details vary by model and are confirmed against this module's drawing. Insulation is class F (155 °C), which is an insulation rating and not an ambient operating temperature; ingress protection and any certified safety function are confirmed with the quotation.
Key Capabilities
- 10 N·m rated, 35 N·m peak: Peak torque is a short-duration figure, so continuous duty has to be sized from the rated column and a defined cycle.
- 19.5:1 reduction, 60 rpm rated: Peak speed is 200 rpm and no-load speed 200 rpm (±10 %), both separate from the rated figure.
- 65 mm diameter, 533.1 g: The axial dimension is 61.2 mm (±0.5) with a 4.5 mm hollow bore, making this the compact member of the family.
- Dual encoders, 17 and 19 bit: Feedback on both the motor side and the gearbox side, over CAN FD or EtherCAT.
- 48 V, 2 A rated and 16 A peak: Line resistance of 0.81 Ω, inductance of 0.93 mH, an 8.3 V/krpm back-EMF constant and ten pole pairs complete the electrical column.
- Backlash of 15 arcmin or less: Rated power is 62.8 W (±5 %) and motor rotational inertia at 8.3 kg·mm² for model inputs.
- Hardware drawings and driver source: The family offers clamp fixation, hollow cable routing, hardware drawings and driver code, with dimensions specific to each model.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | RoboParty |
|---|---|
| Manufacturer | RoboParty |
| Model | ROMOMO 6562 |
| Product Type | Robot joint module (integrated actuator) |
| Rated Torque | 10 N·m ±5 % |
| Peak Torque | 35 N·m (short-duration) |
| Rated Speed | 60 rpm |
| Peak Speed | 200 rpm |
| No-Load Speed | 200 rpm ±10 % |
| Reduction Ratio | 19.5:1 |
| Rated Power | 62.8 W ±5 % |
| Backlash | 15 arcmin or less |
| Mass | 533.1 g measured prototype mass (530 g family specification limit) |
| Rated Voltage | 48 V |
| Rated Current | 2 A ±5 % |
| Peak Current | 16 A ±10 % |
| Line Resistance (20 °C) | 0.81 Ω ±5 % |
| Line Inductance | 0.93 mH ±10 % |
| Back-EMF Constant | 8.3 V/krpm |
| Pole Pairs | 10 |
| Torque Constant | 2.37 N·m/A (reference convention confirmed at quote) |
| Communication | CAN FD / EtherCAT |
| Feedback | Dual encoders, 17 bit motor side / 19 bit gearbox side |
| Outer Diameter | 65 mm |
| Axial Dimension | 61.2 mm ±0.5 |
| Hollow Diameter | 4.5 mm |
| Motor Rotational Inertia | 8.3 kg·mm² |
| Insulation Class | F (155 °C) — an insulation rating, not an operating temperature |
| Structure | Two-stage planetary, inner-rotor |
| Ingress Protection | Confirm at quote |
| Ambient Operating Temperature | Confirm at quote |
| Mounting Pattern | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
It is an integrated robot joint module from RoboParty's ROMOMO actuator family, rated at 10 N·m with 5 % tolerance, 35 N·m peak and 60 rpm rated speed through a 19.5:1 reduction.
No. RoboParty identifies peak parameters as short-duration figures, so the 35 N·m peak figure has to stay separate from the 10 N·m rated torque when a mechanism is sized.
The 6562 is the smaller unit: 10 N·m rated against 44 N·m, 35 N·m peak against 160 N·m, 65 mm outer diameter against 100 mm, and 533.1 g against 1,197 g. The 10062 also runs a 22:1 reduction and 80 rpm rated speed.
Measured prototype mass is 533.1 g, against a family specification limit of 530 g. Neither is a shipping weight or a production tolerance, so the delivered assembly is confirmed with the quotation.
Treat it with care. It is 2.37 N·m/A for this module against 0.163 N·m/A on the larger 10062, so the reference point behind each figure is confirmed with the quotation before either is used in a motor model.
It is offered by quotation — the exact model, control interface, supplied wiring, documentation revision and intended duty are confirmed per project.
Recently Viewed
You haven't viewed any products yet.
